King Computer Solutions
spacer

Archive for the Cyberoam Category

11.30.2012

How to update cyberoam firmware

To update the firmware version on a cyberoam, connect to the console and go to system -> maintenance Back up the existing firmware configuration before updating firmware it’s advisable to do a backup of the configuration. Go to system/maintenance and backup and restore press backup now Press Download to download the backup configuration. It’s advisable […]

02.27.2012

Cyberoam FTP anti virus scanning blocks directory listing from Filezilla client

When using Filezilla FTP client to access a remote server I was finding the remote directory would not list and error with a timeout. To fix this I went into the LAN to WAN firewall rule for LiveUserTraffic and checked off AV & AS Scanning FTP. The directory would then list OK.  

12.18.2011

Congratulations to Peter on completing his Cyberoam security certification

As part of continued professional development at King computer solutions Peter has completed his Cyberoam security certification Congratulations on your achievement!

12.11.2011

Dell DRAC 5 listening ports

Here are the ports to allow through the firewall for various DRAC remote access options. 22* Secure Shell (SSH) 23* Telnet 80* HTTP 161 SNMP Agent 443* HTTPS 623 RMCP/RMCP+ 3668* Virtual Media server 3669* Virtual Media Secure Service 5900* Console Redirection keyboard/mouse 5901* Console Redirection video The default-

12.6.2011

Cyberoam RTP voice not working inbound from calls made out

I had an issue with cyberoam where calls in had voice both ways, but calling out they could hear me, but I could not hear them, i.e. inbound RTP voice traffic was not being forwarded. Virtual server was setup with port range to forward 10000:20000, firewall rule was configured with WAN to LAN rule to […]

09.6.2011

Configure Cyberoam with Telstra wireless USB

This setup was done using a Telstra Aircard 880U USB modem Enable the WWAN interface SSH to the cyberoam and run 4. Console then type the command cybgeroam wwan enable         Reboot the cyberoam and under the network tab you will now see Wireless WAN See http://kb.cyberoam.com/default.asp?id=1797 for information on enabling the Wireless WAN port […]

07.6.2011

Cyberoam blocking SSL access to metatrader axistrader

I recently installed the meta-trader package for trading foreign exchange, but was finding I could not get any connection. Suspecting the cyberoam was the culprit I bypassed it and confirmed that when connected directly to an ADSL modem I could connect. Using the packet filter on the cyberoam I could see packets are being consumed […]

04.10.2011

How to reset Cyberoam router to factory defaults

Unfortunately the reset switch on the cyberoam does not work as you would expect it to, i.e. it does not reset the router to factory defaults. Maybe it should be labelled “Do nothing” instead of reset. In order to reset connect the router by serial cable to a computer. You will need to have a […]

03.25.2011

Cyberoam PPTP VPN Setup

C r e a t e d o n V e r s i o n 1 0 . 0 1 . 0 2 8 6 This document outlines the steps to: Enable PPTP Set Encryption and Authentication Settings Grant Users Logon access via PPTP This document assumes: You are using the User Database Local […]

03.25.2011

Cyberoam WWAN 3G wireless LAN setup

This document outlines the steps to: Enabling WWAN Configuring WWAN Setting Gateway to Active/Backup Settings/Diagnostics