The ideal WordPress installation runs on a linux+apache platform but with a little tweaking, runs just fine on IIS. One common problem is with the installation of plugins and the application of the automatic upgrades of Wordpress. You’ll see something like:
“Downloading update from http://wordpress.org/wordpress-2.x.x
Download failed.: Could not copy files.
Installation Failed”
The problem here is that WordPress [...]
Instructions
Please follow these instructions carefully and closely, if you are not certain that you understand what’s happening STOP.
You will need to be on your MAIN Machine (SERVER). Exit RMS on all machines, including any external interface programs such as PABX, POS, RMSOnline and Boomgate monitors
Click on Start, All Programs, Accessories, Command Prompt – you will see a [...]
Hi folks,
Ever been connecting to a PC with Remote Desktop and have to wait ages while the wallpaper loads before you can log in? After logging in, make this little change and wait no longer!
HKUSERS\Users\.DEFAULT\Control Panel\Desktop\Wallpaper
Remove the value (but leave the key there) and no more wallpaper at the login screen!
To enable a default email client to authenticate with an Exchange 2007 server, the following command must be issued to the Exchange Shell then the POP3 service restarted.
Set-PopSettings -LoginType PlainTextLogin
Note that this will reduce the security of the system but it does help with clients that don’t support advanced security.
Hi Guys.
Had an issue where flashplayer10 kept asking to be installed on a Win Terminal server 2003. After trying to reinstall a few time using both the website installer and Distribution file I was still getting the issue.
In the end I found the solution was a permission issue.
Resolution
Do not use a registry editor to edit [...]
We bought a Patton SmartNode 4112 FXO gateway. This nifty device takes 2 standard phone lines and connects them to your SIP server (be it Asterisk, 3CX or whatever). We’re connecting it to a 3CX Digital PBX and it works a treat. Here are some tips I picked up from working with it:
1. Never hold [...]
To add an Exchange account to your iPhone, tap Settings, then Mail, Contacts, Calendars, then Add Account, then Microsoft Exchange. Note, you can configure only one Exchange account per device..
On the next screen, enter your complete email address, domain, username, password, and a description (which may be anything you like). Ask your Exchange server [...]
1. Ensure the PureMessage tagging are enabled
Open PureMessage
Configuration
Transport SMTP scanning policy
AntiSpam
Configure subject tags and X-headers
Then enable all X-header tagging.
2. Ensure the sender address or domain is not listed in Allowed Senders’s list
Open PureMessage
Configuration
Transport SMTP scanning policy
AntiSpam
Select Allow specific sender
Once you have verified these settings, please continue to monitor the status and the catch rate on [...]
If you have an Exchange server and you’re not using Shared Calendars, you’re missing out on a very useful tool! The following instructions help you add new calendars so you can see at a glance what everyone in your team is doing.
1. Open outlook, switch to Calendar mode, as shown below.
2. Once in Calendar mode, [...]
A Message from the Experts,
All UPS equipment regardless of the level of unit only have very minimal Surge Filtering Built in. We receive countless calls from clients with UPS problems, Most of them relate to incoming surges that have either burnt out the UPS Circuit Boards or have damaged the UPS Capacitors.Â
Â
Below is a document sent [...]