King Computer Solutions

Posts Tagged configure


Configure cyberoam with active directory and terminal server

Installing the authentication client on the Active directory controller Go to the cyberoam download page On your active directory controller download and install the CTASuite Follow the procedure here for implementing single sign on on the Active directory server. Auto install of cyberoam client on workstations To automatically install the client on […]


Configure Windows 7 PPTP VPN with cyberoam

The current version of cyberoam firmware does not support CHAPv2 protocols, so to connection using a PPTP connection to a cyberoam you need to configure specific PAP security settings Edit as of version 10.01.0048 MS-CHAPv2 is available as a protocol 1.-


Configure linksys spa400 with asterisk elastix voip server

The SPA400 operates as a single SIP trunk, it does not allow you to configure per port settings. Its therefore OK to use in a rotary incoming line situation, but not good if you want to redirect particular ports to particular SIP extensions. In that case you may use a Patton or Digium card. Connect […]


How to setup Joomla on an IIS server

This covers setting up a Joomla website on a Windows IIS server You will need to have MySQL installed on the server already. If you do not, use XAMPP to load and configure the packages required from-


Configure Outlook 2003 for exchange server

If you have not already configured outlook for your profile, when you first open at you’ll go through a configuration wizard.-